显示标签为“OEM Orange 5”的博文。显示所有博文
显示标签为“OEM Orange 5”的博文。显示所有博文

2016年5月19日星期四

Step by step to install OEM Orange5 v1.34 programmer software

This is the instruction on how to install Orange5 v1.34 programming software on Windows XP/7/8.

Free download Orange-5 software:
http://www.chinaautodiag.com/download/orange5_se125-b.zip
Operating system:
Windows XP;
Windows 7;
Windows 8.
  


Language:
English and Russian

Workable device:
Note
Warning will pop up sometimes when install device on some laptops for the first time. Just reconnected the device will be OK.
Orange5 setup:
Open my computer/orange5 (E:)/software, then move “orange5v1.34” to the desktop
Install from a list or specific location (Advanced)
Choose the search and installation options
Please wait while the wizard searches…
The device cannot start, and then click finish to start a troubleshooter that can help you resolve the problem.
Setup computer management (local)->Device Manager->universal serial bus controllers->ORANGES USB
Unplug orange 5 USB cable then replug, you will see the drive is working.
Open Orange programmer CnClab
Select options-hardware, click test
Hardware is ok
Select type: Group-MicroChip; Chip-93C66
Read chip 93C66
Choose 93LC56, 93LC46 and read
Notice: do not choose the wrong chip.
Cancel “Chip not responds at 0000”
Choose 93LC66 and read. Then save them in file named Toyota 1 on the desktop
Click erase
Buffer is EMPTY! Write and read 93LC66
Open Toyota 1
Write and read 93LC66
Choose Buffer-checksum
Choose Tools-pintester, press set


2016年5月17日星期二

OEM  Orange5  Programmer Error Load HPL file (SOLVED)

No matter which chip was selected, the OEM  Orange5 always popped up “Error Load HPL file”. And diyodb2 engineers provided their opinions here to help you out.

Symptom display:

Select group1-> 03-carradio-> blaupunkt-> gamma m237
Then Error Load HPL file gamma.hpl


Select group1-> 03-carradio-> blaupunkt-> smartcard
Then Error Load HPL file BlauCard.hpx
Cause: Error open file


Select group1-> 03-carradio-> blaupunkt-> mmc keycard
Then Error Load HPL file BlauMMC.hpx
Cause: Error open file


...
Any chip selected resulted the same error.

Professional suggestions:
1- Free download Orange5 V1.34 software clone:
http://www.chinaautodiag.com/download/orange5_se125-b.zip

2- Copy the OEM  Orange 5 software to the computer local disk
3- Disable or uninstall anti-virus software on PC
4- Install Orange5 V1.34 on Windows XP/ WIN7/ WIN8
NOTE: all above is only for Orange 5 programmer clone

Ceci est du support technique du site Web www.obd2france.com:OEM Orange5 Programmer fichier Load Error HPL (résolu)

How to install Orange5 v1.34 on Windows XP, WIN 7, WIN 8

OEM Orange5 v1.34 programming software can be installed Windows XP/ 7/ 8. But there is a bit different among Orange 5 on different operating system. Here is the instruction on how to setup/ install Orange5 v1.34 on Windows XP, WIN 7, WIN 8.

Compatible device:

For Windows XP 64 bit
For Windows XP 64 bit no special steps are required, just use the 64bit Orange-5 drivers found in software's subfolder ..\Driver\X64

For Windows 7
After you extract the software you will have to restart your PC. While Windows is booting up continuously press F8 key in order to have advanced boot options show up. The menu that appears looks like this:

There select the option Disable Driver Signature Enforcement, and press Enter to continue the Windows boot. In this mode Windows works as usual with the exception that the Signature Enforcement that blocked us from installing the Orange-5 driver is now disabled.
After Windows is done loading plug Orange-5 programmer in a USB port and when prompted to install the drives select the option that allows you to select the driver destination on your hard drive. Choose the path to where you extracted the archive and in particular the subfolders ..\Driver\X64 .

After this step is done your Orange-5 is ready to run.
It should be noted though that the driver currently works only in this Windows mode.
If you shut down or restart your PC, next time when you start it you have again to press F8 and disable driver signature enforcement, otherwise the programmer will not be recognized by the OS.

For Windows 8.1
After you extract the software archive to a desired location
Next step is to disable driver signature enforcement similar to the procedure in Windows 7, the difference is that this is accessed in a different way in Windows 8.
Press the Win + C keyboard combination to bring up the Charms Bar, then click on the Settings Charm

When the Control Panel opens, switch over to the “Update & recovery” section

Then click on the Recovery option on the left hand side:

Once selected, you will see an advanced startup section appear on the right hand side. You will need to click on the “Restart now” button.
Once your Computer has rebooted you will need to choose the Troubleshoot option.

Select Advanced Options:

After that click Startup Settings:

Modifying boot time configuration settings, will require to restart your Computer:

Finally, you will be given a list of startup settings that you can change. The one we are looking for is “Disable driver signature enforcement”. To choose the setting, you will need to press either the F7 or number 7 key.

After reboot Plug in Orange-5
Orange-5 drivers are found in the within the extracted archive Open Device Manager, Find Orange-5 there with a question mark under unknown devices click it and proceed to installing the driver showing the correct path which is: ..\Driver\X64 .

One of the drawbacks of running hardware/software via disabling the driver signature enforcement is that it has to be performed each time a Desktop PC/Notebook is shut down.
The current solution to avoid this problem is to use Hibernate function of Windows instead of Shut Down.

With using hibernate OS will retain the Disabled driver signature enforcement on boot, without need of additional steps. While hibernating it is possible to plug on/off Orange-5 out of the PC. This method is quite useful for notebooks, but it is applicable to desktop PCs as well.

Since Hibernate is using HDD in order to store the data, sufficient free space (depending on individual PC settings/applications running/etc...) on the OS partition is required.
Hibernate is a viable solutions for both Win 7 and Win 8.1.