Which ECU programmer should i buy for garage repair work?

ECU Programmers Reviews, Buying Guides... Here you go.

Every garage needs Tango key programmer and Orange5 programmer... VVDI Prog is for newer cars .my opinion

Xprog is useful too...

Already I have it but Orange5 for hc05(7) hc08(9) and tms more useful at least for me

yes...right...

for HC05E6 I use mostly only Orange5

for HC05(7)x32 I use Xprog

and for HC(9)08 I use R270 or VVDI Prog only

So, for better work,  instead of thinking which one to choose, I should buy them all

....

ECU programmers / auto key programmers mentioned above:

OEM Orange5: most populous

VVDI Prog: high quality

Xprog box: useful

Tango key programmer

R270 (now R280 plus better)

For more information of the programmer you want, just CLICK on it.

Have fun!

www.obd2france.com all rights reserved, Original Article url:Which ECU programmer should i buy for garage repair work?

VVDI Prog read write W211eeprom& flash ok

VVDI Prog read write W211eeprom& flash ok:

For Mercedes W211 gateway, vvdi prog read &write eeprom and flash ok....A211 445 26 00.
Connection like Xprog V5.60

Xhorse VVDI PROG latest software version V4.5.0 update - free download

Xhorse VVDI PROG latest software version V4.5.0 update (2016-09-26):

* This version DON't need update firmware
* Fix some bugs

+ Add VVDI PROG USER MUNUAL 4.5.0 version in Doc folder
* Fix ATMEGAxx8 diagram error problem
* Change D70f3624 diagram(add QFP64 package)

+ Add ATMEGA48P,ATMEGA48PB, ATMEGA88P,ATMEGA88PB, ATMEGA163,ATMEGA164,
ATMEGA164P, ATMEGA168P,ATMEGA168PB, ATMEGA169P,ATMEGA323,ATMEGA324, ATMEGA324P,
ATMEGA324PB, ATMEGA325, ATMEGA325P, ATMEGA3250, ATMEGA3250P, ATMEGA328, ATMEGA328P,
ATMEGA328PB, ATMEGA329, ATMEGA329P,ATMEGA3290, ATMEGA3290P,ATMEGA644, ATMEGA644P,
ATMEGA645, ATMEGA645P, ATMEGA6450, ATMEGA6450P, ATMEGA649, ATMEGA649P, ATMEGA6490,
ATMEGA6490P, ATMEGA103, ATMEGA1284, ATMEGA1284P optionsin <2-MCU>-><ATMEL-ATMEGA_XXXX>

+ Add HC908GZ8,HC908GZ16, HC908GZ32,HC908GZ48,HC908GZ60,HC908GZ8_SECURED,HC9 08GZ16_SECURED,
HC908GZ32_SECURED,HC908GZ48_SECURED,HC908GZ60_SECU RED options in <2-MCU>-><MOTOROLA-MC68HC(9)08> 

+ Add MC912DT128_UNSECURED,MC912DT128A_UNSECURED,MC912DT 128P_UNSECURED,MC912DT128_SECURED,

MC912DT128A_SECURED,MC912DT128P_SECURED optionsin <2-MCU>-><MOTOROLA-MC68HC(9)12>

+ Add MT20U2-MC912DT128P option in <3-ECU>-><DELPHI> 

+ Add BESTURN-B90-BCM option in <4-IMMOBILIZER>-><FAW> 

+ Add FENGGUANG(2016) option in <5-DASHBORAD>-><DONGFENG> 

+ Add XC60-HIGH-EQUIPPED(2014) option in <5-DASHBORAD>-><VOLVO>

VVDI PROG v4.5.0 Download:

https://mega.nz/#!Pp4HxLxS!vZ8jiHhSgU1zOdBgLOgEzE6xBSK4gjcPpVe4oeybhG0

password:123456

VVDI PRO VVDIPROG v4.5.5 replace Porsche BCM 2M25J CPU

Managed to replace/ change Porsche 2M25J CPU on BCM, with back-up of original D-FLSH and P-FLSH

I first tried it myself.

Rewrite partition for 2M25J

If the D-FLSH is 16K，set EEE partition as 8

If the D-FLSH is 32K，set EEE partition as 0

Xhorse VVDI PROG Programmer:

Partition division complete. Then write the backup D-FLSH, and then P-FLSH

Finish encryption in the end. Porsche encryption byte: 7D

However, the BCM cannot work at all. Failed to read data and unencrypt.

Discussed with the engineer, i adopted the method below:

Step 1 - completely clear the encryption

Select the device and clear the encryption fully

Then CPU is all cleared. Again divide CPU partition. set the partition as 8

Step 2 - Write D-FLSH

Some data to modify before writing D-FLSH

Find out Line “7FF00” and replace “7D” with “FF”, then write CPU

Then perform encryption

When all above is complete, unencryption and encrytion-reading work ok.

So, a good device needs a good way to perform it for the best benefit.

Hope this helps.

Product:

VVDI PROG Programmer Prog V4.5.5:

This is from obd2france.com website technical support: VVDI PRO VVDIPROG v4.3.1 replace Porsche BCM 2M25J CPU