Why do I need to buy can clip more nissan consult 3 2 in 1?

Pourquoi dois - je acheter peut couper plus de nissan consulter 3 2 en 1 ?

CAN CLIP et consulter 3 pouvez utiliser le même matériel
Et...
Renault peut couper le matériel est bon pour nissan consulter le logiciel 3, il est en mesure de diagnostiquer les voitures nissan avec Renault peut couper le matériel!

Très bon et moins cher - € 165 (SP19-b et SP38-b 2 en 1)



Renault peut couper € 86:
http://www.obd2france.com/wholesale/renault-can-clip-diagnostic-interface.html

Nissan consulter 3 € 133:
http://www.obd2france.com/wholesale/consult-3-iii-pour-nissan-dfait-de-diagnostic-professionnel-sans-bluetooth-2607.html

This is from can clip renault blogger:Why do I need to buy can clip more nissan consult 3 2 in 1?

Which Nissan Consult 3 chinese clone to buy?

Nissan Consult 3 is a professional Nissan diagnostic tool for almost all Nissan and Infiniti from 1996 to the latest in different regions worldwide. The Consult 3 is equipped with various function including simultaneous self-diagnosis of an entire system or data recorder and programming on ecu, useful not only for motorists but also for professionals. An important advantage of this product can be considered as the presence of Bluetooth, allowing you to carry out the work without any extra wires. 

When buying the device, to get everything what should have this device, you should pay attention to the cost of the device and the elements mounted thereon. The correct copies must be installed processor - Renesas M32C / M30855FJ. 

Then genuine Consult iii board:

   

Good copies of Consult 3 PCBs:

Nissan Consult 3 Bluetooth version

The bluetooth module on consult3

Consult iii without a Bluetooth module

These two versions above are the best Consult 3 Chinese clone.

To choose an alternative to the original Consult 3 makes the right choice; hope the brief description helps you. Anyway, Good luck with Chinese copies!

Original:Which Nissan Consult 3 chinese clone to buy?

How to get Nissan Consult III Plus work with Ford VCM2?

Have got the alliance vi to work with Consult3 plus software. And make Consult III+ to run it with Ford VCM II interface.

CarDaq
Actica Passthru+ XS
Python1B
Nissan USB Diag
Alliance VI
And The obvious tool VI2

all these are the best to work with Consult 3 plus.

others will also work but maybe not as well.

The Ignition ON its not seen if you use VCM II
I use AVDI and Ignition ON it is not seen too
I read that no matter what j2534 tool you use the Ignition ON its not seen
Probably, only if use Alliance VI2, but alliance vi is quite a bit more complicated to set up

Here is thesetup of VCM II with Nissan Consult 3+.

For ford VCMII
In the Diagnostictool.ini put Ford-VCM-II
Install the consult 3 plus
Install your VCMII Manager and drivers.
In passthru 4.04 in reg edit and rename NISSAN_VI2 To something else
change name Bosch Ford-VCM-II to NISSAN_VI2
Reboot computer and test it

I tested it once with limited success.

Attachment: [Diagnostictool.ini]

https://mega.nz/#!5kMm2TwI!1m7PLJEx_DM_ll3a1UBWuG4ZviRlSyH80iKvJN0-BLk

Note 1: [alliance vi]

The sonde alliance vi is the end for the sonde can clip RTL. remplaced by sonde alliance vi but what is it.

Renault Aliance VCI = 100% Same with Nissan Consult III VCI...
Just & ONLY different name...

Note 2: [workable sw]Clone Consult III (who using patch) for to working with Nissan Consult III S/W, DID NOT working with Clip Software!!!

It seems now Clip S/W needs NEW "Pill" for Clones..

Original:How to get Nissan Consult III Plus work with Ford VCM2?