Tested SuperOBD SKP900 program 2007 Citroen C4 remote key OK

It’s newly tested working that you can program 2007 Citroen C4 remote key by using SuperOBD SKP900 Key Programmer! Below part will show you how-to guide and steps.

A 2007 Citroen C4 with a working remote key wants to add another new remote.

Step1. Connect SKP-900 key programmer with Citroen C4 via car OBD diagnostic port. Choose “Immobilizer” then “Citroen”.

Choose “Immobilizer 2” and “Immobilizer System”.

Step2. Insert the new remote key to turn on car ignition. Press YES button to continue.

Choose “Adapt Key” function.

Follow the instruction to close all car doors and car trunk. Press YES button to continue.

Step3. Enter the pin code. (You can calculate this Citroen pin code CCW3 using OBDSTAR F108 PSA Pin Code Tool)

Press YES button to confirm.

Turn ignition off then turn it on again.

Wait a while and it will show you the tip “Adapt Complete”. Press the NO button to go back. Remove the new key.

Step4. Use the new key to turn ignition on then press the key LOCK button for 3 seconds. All steps complete!

In this way SKP-900 key programmer successfully program a new remote key for Citroen C4 2007!

This is from skp 900 key programmer china Technical Support:Tested SuperOBD SKP900 program 2007 Citroen C4 remote key OK