I-2013 Passthru J2534 works perfect with DAS XENTRY?

I’m wondering if someone know how to set up Mercedes Xentry/DAS to work with I-2013 Multidiag Access J2534 interface.

Here is what i get from fellows in different forums. Big thanks to all.

Questions: Dear all, Is this passthru j2534 works perfect with DAS XENTRY ?

Answers... Here you go...

No.only work Xentry

Don't waste your time!

Online programing is ok with passthru!

But diagnosis by DAS and Xentry is not good at all!

With new cars,works good on 2005-2007 and UP (mercedes and smart)Old cars can only connect to the Motor unit and in some models only

I confirm that it works with almost all modules on can-bus..I test just for fun once and I was impressed..diagnose & coding almost without any limits but I test only on w211,w219,w203 and all cars was 2004 to 2009. wink2 old actia is still one of my favorite tools in my boxes and can work with many software on diler level

....

Hopefully, it’s helpful to you all. And good luck.

This is from Multi-Diag Actia j2534 Technical Support:I-2013 Passthru J2534 works perfect with DAS XENTRY?

I-2013 Multidi@g Access Communication Error after Update

I-2013 mutidiag access failed to communication after update. And here are professional suggestion by obd2france.com. Hopefully, it helps someone.

   

Mise a jour de l'interface de communication

(Updating the communication interface)

Erreur pendant le telechargement de la vci. Verifiez que la vci est connectree a l’outil et au vehicule.

(Error while downloading vci. Verify that the vci is connected to the tool and the vehicle.)

Suggestion from professional technicians work for obd2france.com:
1- try to re-install windows system (Windows XP or Win7 32bitbetter)

2- disconnect network connection

3- re-install Multidiag access i-2013 according to the video guide below:

http://youtu.be/vc8aQxOMP_A

4- then it should work fine.

   If the Multidiag i-2013 still fails to connection, please send your unit back to the vendor for repair.

To update Multi-diag software needs technique and luck:

You need to buy the corresponding chip to change it on the board, before software update.

V2011 update chip for Multi-Di@g J2534 Interface

This is the PIC12F629 chip for Multi-diag j2534 to update your tool from 2010 to 2011.

V2013.1 update chip for Multi-Di@g J2534 Interface

With this update chip, you can update your Multi-Diag j2534 interface from V2010 V2011 to V2013.1.

Tutorial: How to update Multi-Diag J2534 interface to v2013 v2011

Note: when use i-2013 multidi@g to test the car, it’s a must to setup the USB driver first.

Original - from obd2france.com obd2 francais:I-2013 Multidi@g Access Communication Error after Update

How to update Multi-Diag J2534 interface to v2013 v2011

Usually, users are not advised to update Multi-Diag J2534. But here, technicians offers 100% working solutions of update Multi-Diag J2534 interface to v2013 v2011.

obd2france.com will provide you the location of the chip and V2013.1 or V2011 software, this solution allow you to update as many interface as you need.

First, you need to buy the corresponding chip to desolder on the board, before software update.

V2011 update chip for Multi-Di@g J2534 Interface

This is the PIC12F629 chip for Multi-diag j2534 to update your tool from 2010 to 2011.

Workable for old version 2010 Multi-diag j2534, with item number SP04 and SP04-B at obd2france.com.

If you have bought this two items above and want to update it to 2011 version, you can buy this chip.

Note: Hardware and software for 2010 and 2011 version are different.

Then you can change the chip by yourself.

V2013.1 update chip for Multi-Di@g J2534 Interface

With this PIC12F629 update chip, you can update your Multi-Diag interface from V2010 V2011 to V2013.1.

Here is the place of the chip:

After you update your tool and get it ready, please use the Multi-diag software of the CD from obd2france.com. For free download link of Multi-diag j2534, it might not work! And you must try on your risk.

Then install Multi-diag j2534 on your windows. (Windows XP or Win7 32bitbetter)

Video guide: How to install I-2013 Multi-diag j2534

http://youtu.be/vc8aQxOMP_A

Tech support from http://www.obd2france.com/

C'est à partir de OBD2 service technique support technique:How to update Multi-Diag J2534 interface to v2013 v2011