VVDI2 Citroën read PIN & key learn, how to do

VVDI2 PSA software can read pin codes and do key learning for Citroën cars?

Definitely YES!

Engineers working for obd2france.com confirm this functions.

Attach photos of how to use vvdi2 for Citroën read pin and key learn:

use vvdi psa software

read pin available

every time switch ON ignition, switch OFF/ON times vvdi increase 1

if the times not increase, please switch OFF ignition again, take key off ignition switch, wait above 10 seconds, then switch ON

repeat the procedure until the switch OFF/ON times increase 1

key learning

the working vvdi2 key programmer

VVDI2 Peugeot, Citroën reviews:

citroen c4 work 100% for read pin
tested 100%

i read on Monday c4 pin with version 4.0... no problem 2006

citroen c4 I can confirm also it is working

I did c4 No problem

 just read the pin and cs from ecu.

make backup from cluster, and the cluster configuration.

then make a dealer key, and learn it with pin.

my Peugeot 308 2008 BSI JC pin extracted OK. Key learn OK.

Tip: only for CAN line protocol based Peugeot, Citroën and DS cars

2016 VW All Key Lost solved by VVDI 2 VAG

This is a test report of Xhorse VVDI2 for 2016 new VW All Key Lost.

Vehicle: Johnson Controls with 95320 - UDS

Generally, this type instrument use 95320 EEPROM. There are 2 methods NEC+95320 (Johnson Controls), NEC+95320 (JCI 2013 Bora/Jetta)

There’s a special procedure for prepare dealer key: Menu-> Key Learn-> 4^th immobilizer system - VW/Skoda/Seat, choose the specific type accord the car

Lost all key - OBD prepare key:

This function will read PIN/CS from ECU (or input PIN/CS) and prepare dealer key. The dealer key can learn to car.

After this function, it changed 6 bytes of all 12 bytes CS in the immobilizer system, so the old key cannot be used anymore, and don’t accept any key from the dealer.

Attach photos of the test procedure:

This is from Xhorse tools,Xhorse Shop technical support:2016 VW All Key Lost solved by VVDI 2 VAG

VVDI2 PSA tool on Peugeot 308 2008 read PIN, key learning OK

VVDI2  PSA... YES!

I verified VVDI2 PSA tooltoday... support read PIN, key learning

 

for PSA key learning:

I just read the pin and cs from ecu.
Make backup from cluster, and the cluster configuration.
Then make a dealer key, and learn it with pin.

My Peugeot 308 2008 BSI JC pin extracted OK. Key learn OK.

Note: only for CAN line protocol based Peugeot, Citroën and DS cars

This is from Xhorse tools, Xhorse Shop technical support:VVDI2 PSA tool on Peugeot 308 2008 read PIN, key learning OK

How to use VVDI2 VAG for reading CS PIN MAC

It’s a VVDI2 VAG manual of CS, PIN, MAC reading. Manually read cs, pin and mac from vag 4th immobilizer system ECU and automatically from vag 5th immobilizer system ECU

Part 1: Xhorse vvdi2 vag - manually - vag 4th immobilizer

You can select autodetect engine control unit existing to get PIN/CS or type in known

PIN/CS manually

CS:

Component security bytes. It has 12 bytes for UDS 4th immobilizer cluster. Move your mouse to this area, you will get balloon show 7 bytes CS in ECU show original 6 byes CS is: C2 D3 45 7E 68 0E). You can’t find 7th byte CS from UDS 4th immobilizer cluster, it don’t have 7th byte, it have another 6 bytes CS part 2

CAN 4th immobilizer cluster (CDC32xx, A3/TT/R8) will have 7 bytes at this value. That

is the original 7 bytes CS

ECU must have same 6 bytes CS with balloon show CS bytes. If they are not same,

you car can’t start

PIN:

login code, it can use login to ECU or other module which support login immobilizer PIN. You can learn dealer key with CAN protocol cluster ECU has same PIN with this value. If not same, car will not start. So, for CAN protocol cluster, you can learn key with PIN read from ECU

MAC:

Synchronization codes between ECU and immobilizer system, usually have 4 bytes. The first 2 bytes is immobilizer synchronization code, the last 2 bytes is ECU synchronization code. MAC value in the picture above is “B188708F”, “B188” is immobilizer synchronization code, “798F” is ECU synchronization code. Generally, the synchronization code for ECU or immobilizer system is a fixed value. If you install new ECU, MAC value in immobilizer will change last 2 bytes to new ECU synchronization code; if you install new immobilizer, MAC value in ECU will change first 2 bytes to new immobilizer synchronization code. 

Normally, MAC value must be same between ECU and immobilizer. If there are not same, ECU and immobilizer system will have same DTC error like this: Engine control unit is not authorized. You can fix this error by “Adapt Unit->select ECU->Read->Write”, it willsynchronize MAC automatically between ECU and immobilizer system

Part 2: Xhorse vvdi2 - automatically - 5th immobilizer vag

Autodetect PIN/CS:

Read PIN and CS from engine control unit or immobilizer system automatically. After success read PIN and CS, you just need input key count to learn key

NOTE: PIN, CS, MAC function only can be authorized for free for those with Xhorse iKeycutter Condor XC-MINI key cutting machine.

This is from Xhorse VVDI technical support:How to use VVDI2 VAG for reading CS PIN MAC

How to Update Xhorse VVDI2 From V1.2.2 to V1.2.3 (2016-11-16)

Free Download  Xhorse VVDI2 V1.2.3  Software

https://mega.nz/#!39xUCSQa!Xfw9OWF2T4PgyUjC1G5RQ1XlADTxGQOZWucQ-lNEGHQ

 v2.2.3(2016-11-16)
===== Support software version ====
VAG V1.2.3
BMW V1.2.3
Porsche V1.2.3
PSA V2.0.5
Passthru J2534 V1.2.3
Online Update Tool V1.2.2
Quick Start V1.2.3
You can find the detail update information from Readme in newest software, Mainly include:
1. Fix bug for lost all key via OBDII: support keyless Go cars
2. Prepare remote: Add support for Chevrolet Epica
3. Update remote database

How to update  Xhorse VVDI2  From V1.2.2 to V1.2.3:
1. Close other VVDI2 software, Connect VVDI2 to PC with USB cable
2. Choose VVDI2 firmware version
3. Press button "Update Online" to start
---------------------------ATTENTION!!!---------------------------
If failed, close antivirus and firewall software, try again
DON't shutdown your PC or disconnect USB cable while updating!!!

VVDI2 software V1.2.3 update details:
*** 2016-11-16
*** Require firmware V2.2.3
************************************************************************
===== VAG V1.2.3 =====
1. Fix bug for lost all key via OBDII: support keyless Go cars
2. Bugfix

===== BMW V1.2.3 =====
1. Bugfix

===== Porsche V1.2.3 =====
1. Bugfix

===== PSA V2.0.5 =====
1. Bugfix

===== Transponder Programmer V1.2.3 =====
1. Fix bug for copy some HITAG2(46) transponder
2. Prepare remote: Add support for Chevrolet Epica
3. Immobilizer data tool: bugfix Skoda fabia 93C86
4. Bugfix

===== J2534 V1.2.3 =====
1. Bugfix

===== Quick Start V1.2.3 =====
1. Bugfix

VVDI2 PSA support pincode reading & key learning for CAN line PSA cars

VVDI2 Full package came with PSA Programmer and pin reader for a few days. And today, technicians in obd2france.com verified vvdi2 psa tool can read pin codes and do key learning with working keys on CAN based PSA- tested no issues.

VVDI2 PSA function:

VVDI2 PSA function only support CAN line protocol to add keys, learn keys and read pincode (with working key)

note: PSA change KM function will be added maybe in the near future.

PSA cars under PSA option, years, models, etc.:

CAN line protocol based Peugeot, Citroën and DS cars

How to use xhorse vvdi2 for PSA key learning:

Just read the pin and cs from ecu.
Make backup from cluster, and the cluster configuration.
Then you make a dealer key, and learn it with pin.

tested model: Peugeot 308 2008 BSI JC pin extracted OK. Key learn OK.

So, now vvdi2 full version authorized functions includes:

(VK-01)Transponder Programmer YES
(VJ-01)Passthru J2534 YES
(VV-01)VAG 4th immobilizer NO
(VV-02)VAG 5th immobilizer NO
(VB-01)BMW OBD YES
(VB-02)BMW CAS4 YES
(VP-01)Porsche immo data tool YES
(VPSA-01)PSA YES

Original:VVDI2 PSA support pincode reading & key learning for CAN line PSA cars