显示标签为“xhorse VVDI2”的博文。显示所有博文
显示标签为“xhorse VVDI2”的博文。显示所有博文

2017年3月14日星期二

VVDI2 Citroën read PIN & key learn, how to do

VVDI2 PSA software can read pin codes and do key learning for Citroën cars?
Definitely YES!
Engineers working for obd2france.com confirm this functions.
Attach photos of how to use vvdi2 for Citroën read pin and key learn:
use vvdi psa software
read pin available
every time switch ON ignition, switch OFF/ON times vvdi increase 1
if the times not increase, please switch OFF ignition again, take key off ignition switch, wait above 10 seconds, then switch ON
repeat the procedure until the switch OFF/ON times increase 1

key learning

the working vvdi2 key programmer
VVDI2 Peugeot, Citroën reviews:
citroen c4 work 100% for read pin
tested 100%
i read on Monday c4 pin with version 4.0... no problem 2006
citroen c4 I can confirm also it is working
I did c4 No problem
 just read the pin and cs from ecu.
make backup from cluster, and the cluster configuration.
then make a dealer key, and learn it with pin.
my Peugeot 308 2008 BSI JC pin extracted OK. Key learn OK.
Tip: only for CAN line protocol based Peugeot, Citroën and DS cars

2017年2月28日星期二

2016 VW All Key Lost solved by VVDI 2 VAG

This is a test report of Xhorse VVDI2 for 2016 new VW All Key Lost.

Vehicle: Johnson Controls with 95320 - UDS
Generally, this type instrument use 95320 EEPROM. There are 2 methods NEC+95320 (Johnson Controls), NEC+95320 (JCI 2013 Bora/Jetta)

There’s a special procedure for prepare dealer key: Menu-> Key Learn-> 4th immobilizer system - VW/Skoda/Seat, choose the specific type accord the car

Lost all key - OBD prepare key:
This function will read PIN/CS from ECU (or input PIN/CS) and prepare dealer key. The dealer key can learn to car.

After this function, it changed 6 bytes of all 12 bytes CS in the immobilizer system, so the old key cannot be used anymore, and don’t accept any key from the dealer.
Attach photos of the test procedure:











2017年2月15日星期三

VVDI2 VAG copy 48 chip keys

Xhorse VVDI2 VAG key programmer can copy 48 transponder, without binding a Condor Mini key cutting machine.
Vvdi vag 1.2.6 download on Mega:
Require vvdi2 firmware v2.2.5
Run VVDI2 VAG software
Select Key learn in the menu
Then 4th immobilizer system – copy 48 transponder:
Step 1
Copy 48 procedure require PIN and component security bytes from cars
Select Get component security from engine control unit via obdii
Step 2
Connect the emulator to VVDI2 commander and switch ON ignition with the emulator, switch OFF/ON for 3 times
(attention: it requires OBD when lost all key)
Step 3
Decode the collected data via internet, and save the “calculate 48 data”. You can copy/prepare key with “calculate 48 data”
(attention: every success calculation will cost 100 remote points)
Step 4
Learn the new key with “calculate 48 data”. If the key was made by copy, it can start engine without learn




[Note 1] About new adapter Vvdi2:
some nec24c32 nec24c64 nec35XX all key lost not need remove instrument.(need read cs from ecu).
[Note 2] About copy 48 function on VVDI2:
(1) Authorize copy 48 function require 1000 remote points, require buy an extra emulator
(2) You can exchange it with "Transponder Programmer -> Menu -> Points System"
(3) Every success calculate will cost 100 remote points
(4) Copy 48 fucntion use in 4th immobilizer system(Dashboard), support type: NEC24C32, NEC24C64, NEC24C64 colordisplay, A1, A3/TT/R8, Q3, New tiguan 5ND920873B, 5ND920883B etc
(5) Copy 48 fucntion can work on the car that which support read PIN and CS via OBDII. Ofcourse, known CS and PIN is supported. Support make new key, support add keyless GO keys, especially support lost all key
(6) For Passat B6/CC only support clone 48 transponder(must have working key), don't support 46 transponder, dont support keyless Go, dont support lost all key

This is from Xhorse tools,Xhorse Shop technical support:VVDI2 VAG copy 48 chip keys

2017年1月15日星期日

VVDI2 PSA tool on Peugeot 308 2008 read PIN, key learning OK

VVDI2  PSA... YES!
I verified VVDI2 PSA tooltoday... support read PIN, key learning
 
for PSA key learning:
I just read the pin and cs from ecu.
Make backup from cluster, and the cluster configuration.
Then make a dealer key, and learn it with pin.
My Peugeot 308 2008 BSI JC pin extracted OK. Key learn OK.
Note: only for CAN line protocol based Peugeot, Citroën and DS cars

This is from Xhorse tools, Xhorse Shop technical support:VVDI2 PSA tool on Peugeot 308 2008 read PIN, key learning OK

2016年12月1日星期四

2016 vag ME17.5.22 all key lost with VVDI2 VAG

Have managed to use Xhorse VVDI2 VAG commander for 2016 new vag all key lost. Report it here.
Ecu type:
Me17.5.22

插入图片1-11

Note:
Procedure 12:
Johnson control with 95320 - uds
Generally, this type instrument use 95320 EEPROM.
There are two methods NEC+95320(Johnson control), NEC+95320(jci 2013 bora/jetta)
There’s a special procedure for prepare dealer key:
Menu->key learn->4th immobilizer system - VW/ skoda/ seat (choose the specific type according to the car)
Lost all key- OBD prepare key
This function will read PIN/CS from ECU or (input PIN/CS) and prepare dealer key. The dealer key can learn to car
After running this function, it changed 6 bytes of all 12 bytes CS in immobilizer system. So the old key cannot be used anymore, and don’t accept any key come from dealer

Tag: VVDI2 programmer:

Rapporter l'article:


Xhorse VVDI2 lire tableau de bord, precode CS à la clé, ajouter des clés