Here is a detailed guide with pictures for beginners: How correctly connect Lexia 3 PP2000 Citroen Peugeot Diagnostic Tool with your car and laptop? Set Peugeot 307 2005 as an example:
Step 1: Find your car OBD2 port/connector
Connector is at left side under the steering wheel. You can use a flat screwdriver to remove the cover, the green OBD port is behind it.
Step 2: Connect Lexia3 PP2000 interface with car
Use this cable with a 16 pin OBD connector and a round connector.
Plug the 16 pin OBD connector into green car OBD port.
And connect the round connector end with Lexia3 PP2000 interface’s round connector as below:
Step 3: Connect Lexia3 PP2000 interface with laptop/PC
Use this short USB cable:
Connect the square end of this cable with Lexia3 PP2000 interface as below:
Then connect the USB end of this cable to laptop. You can start to use Lexia3 PP2000 interface!
Recommended Lexia3 PP2000 tool:
€75 Lexia3 PP2000 with full chip 921815C, 12pcs 3 relays, 7pcs optocouplers
Support Peugeot Citroen 1994-2005
Work good on Peugeot 307 and some Citroen C5 models
€79 Lexia3 PP2000 full chip + S.1279 Module Cable
No need install cable driver, directly plug and use!
Support new Peugeot Citroen vehicles including:
Peugeot Bipper, Peugeot Boxer III, Peugeot Boxer III minibus, Citroen Nemo, Citroen Jumper III , Citroen Jumper III minibus
www.obd2france.com all rights reserved, Original Article url:How to connect Lexia3 PP2000 with laptop and Peugeot 307?
没有评论:
发表评论