This write-up explains what the difference is among Lexia, Diagbox and Peugeot Planet PP2000, which would be a good idea for a total newbie in car diagnostics software that Lexia 3 cable required.
Both Diagbox and PP2000 are used to connect to the car's ECU and carry out diagnostics and manage settings. Which is a better software, however?
Lexia: Citroen, Planet: Peugeot, Diagbox: Citroen & Peugeot
Lexia3 - hardware
Lexia - Software for Citroen
Planet - Software for Peugeot
Diagbox - Front end which contains variations of both of the above
Diagbox is the only one which is still updated.
The hardware is currently on Revision C.
Diagbox: newer, PP2000: quicker
PP2000 and Diagbox are roughly the same thing , Diagbox being the newer software ,
PP2000 is a quicker software but will become obsolete over the next few years as Peugeot will stop using it this year ,
no point in getting PP2000 then having to change to Diagbox
Peugeot Planet: easier and faster
I have planet and also being a newbie installed planet then diagbox they both worked fine though diagbox was a lot slower (you have to start diagbox then choose planet off the option list) so basically if its just for use on your own car then using planet on its own is easier and faster though if your going to attempt using the interface on other vehicles may as well install diagbox with planet and lexia
Lexia + PP200 = Diagbox
lexia is for citreon
planet pp2000 is for peugeot
put both programmes into one software = diagbox
if your going to buy it you might asswell get diagbox which most new interfaces come with anyway.
Both Lexia & PP2000 available within Diagbox
They are the same.... the discs supplied usually contain PP2000 and Diagbox on one disc (PP2000 is also available within the Diagbox installation), and lexia for Citroens on the other. Lexia is also available within Diagbox.
So if you find an interface with rev C, the software discs will contain everything you need and more.
PP2000 on 32-bit, Diagbox on 64-bit
Planet will only run on 32-bit. Diagbox will run on 64-bit, but when you try to call Planet through Diagbox it will crash because it must have 32-bit.
What I do is install VMWare Player (free). Using that, create a virtual machine XP SP3 32-bit (you will need the disk and key). Then install Planet into that. Works well. Sounds very techy, but it is surprisingly easy, because VMWare is so well documented. When installing Planet, do not plug the Lexia interface in to the PC until prompted.
Planet & Diagbox are software Lexia cable required
The Lexia is the cable required to use the software. Only the cable.
To use the cable you will need software as well, Peugeot Planet and Diagbox are the 2 pieces of software to choose from.
Diagbox is much newer software that supports even the latest cars. However I prefer the interface of Peugeot Planet, much easier not to get lost in there.
Generally when you buy a Lexia software will be included on a disk. As to whether it is genuine or not, you should check with the seller before purchase.
2017年6月21日星期三
2017年4月4日星期二
Free download Lexia3 PP2000 Diagbox 7.02 to 8.26 ALL versions
Lexia3 PP2000 Diagbox all versions here! You can free download: Diagbox 7.02, 7.06, 7.07, 7.08, 7.11, 7.16, 7.24, 7.40, 7.58, 7.60, 7.62, 7.63, 7.64, 7.65, 7.66, 7.74, 7.76, 7.77, 7.82, 7.83 (8.19), 8.20, 8.26.
Free download Lexia 3 Diagbox 7.02 to 7.82:
https://mega.nz/#!dgpF0CDJ!yjaVbuP7bllDTitn8KAzTVS2ey2Z8KUsNPUdWO2mgq8
No pass
Free download Lexia 3 Diagbox 7.82 to 7.83 (8.19):
https://mega.nz/#!IhNFmYrD!GLyERFpKftKAAaHN8mwAzI6p4mqMS9pVSw7EG1gCUM0
Password: Very Simple!
Free download Lexia 3 Diagbox 8.20 to 8.26:
https://mega.nz/#!kkNEmbpR!iTkm4OVDfgTDWRjg3c_-TIWJQnr185jvzN2bML07tlU
No pass
Please note before you download:
Tool recommended work with Diagbox:
Lexia 3 PP2000 Citroen Peugeot Diagnostic Tool (Top popular, €75)
Lexia 3 PP2000 Diagnostic Tool with S.1279 Module Cable (High cost effective €79)
All Diagbox free download links are tested working, no dead links!
Download and enjoy at you own risks!
Tested safe and working well Lexia 3 Diagbox 7.76 only €6.99!
www.obd2france.com all rights reserved, Original Article url:Free download Lexia3 PP2000 Diagbox 7.02 to 8.26 ALL versions
2017年4月3日星期一
How to program Peugeot 307 remote key by Lexia 3 Diagbox?
Do you know how to program Peugeot 307 remote keys by using Lexia 3 Diagbox? Check below steps!
Step 1
Connect Lexia3 Diagnostic Scanner Tool with Peugeot 307 via OBD2 port.
Turn ignition on and open Diagbox software.
Select car brand “Peugeot”.
Select car model “307”.
Step 2
Go to “Diagbox” and “Repair”.
It will automatically do a Global Test to all car modules. After that you click “BSI” control unit.
Then choose “Configuration”, “Learning” and “Programming of keys” as below:
Step 3
To program new keys, you need car pin code.
Enter pin code as “BSI Confidential Code” then follow the tip to enter it again.
Next you can enter the key number you want to program.
Step 4
Follow the instruction: turn ignition off then within 15 seconds you should insert the new key to turn ignition on.
New key#1 is programmed OK. Turn ignition off and remove the key.
Insert new key#2 in ignition, turn ignition off then within 15 seconds you should insert the new key to turn ignition on.
In this way, you successfully program new remote keys for Peugeot 307 using Lexia 3 Diagnostic Tool!
www.obd2france.com all rights reserved, Original Article url:How to program Peugeot 307 remote key by Lexia 3 Diagbox?
2017年3月27日星期一
How to connect Lexia3 PP2000 with laptop and Peugeot 307?
Here is a detailed guide with pictures for beginners: How correctly connect Lexia 3 PP2000 Citroen Peugeot Diagnostic Tool with your car and laptop? Set Peugeot 307 2005 as an example:
Step 1: Find your car OBD2 port/connector
Connector is at left side under the steering wheel. You can use a flat screwdriver to remove the cover, the green OBD port is behind it.
Step 2: Connect Lexia3 PP2000 interface with car
Use this cable with a 16 pin OBD connector and a round connector.
Plug the 16 pin OBD connector into green car OBD port.
And connect the round connector end with Lexia3 PP2000 interface’s round connector as below:
Step 3: Connect Lexia3 PP2000 interface with laptop/PC
Use this short USB cable:
Connect the square end of this cable with Lexia3 PP2000 interface as below:
Then connect the USB end of this cable to laptop. You can start to use Lexia3 PP2000 interface!
Recommended Lexia3 PP2000 tool:
€75 Lexia3 PP2000 with full chip 921815C, 12pcs 3 relays, 7pcs optocouplers
Support Peugeot Citroen 1994-2005
Work good on Peugeot 307 and some Citroen C5 models
€79 Lexia3 PP2000 full chip + S.1279 Module Cable
No need install cable driver, directly plug and use!
Support new Peugeot Citroen vehicles including:
Peugeot Bipper, Peugeot Boxer III, Peugeot Boxer III minibus, Citroen Nemo, Citroen Jumper III , Citroen Jumper III minibus
www.obd2france.com all rights reserved, Original Article url:How to connect Lexia3 PP2000 with laptop and Peugeot 307?
2017年2月7日星期二
How to use PSA-COM lexia 3 diagnostic tool for Citroen XSARA
The PSA-COM obd2 scanner now has successfully replaced Lexia 3 diagnostic tool for for Peugeot/Citroen vehicles to display identification, read and clear fault codes, display and record measured values and perform actuator tests on various electronic control units (ECUs) such as Engine, Gearbox, ABS, Airbag/SRS etc.
Car: Citroen XSARA
Ecu: Motronic MP 5.2
Click to get working PSA diagnostic software (SuperScan)
Note: compatible with Windows 2000/XP/Vista/7/8/8.1/10 or Linux and Mac OS/X (using Wine emulation)
psa-com diagnostic tool:
PSA-COM (SuperScan) using on Citroen XSARA:
PSA-COM diagnostic tool test result:
Fault code (DTC) reading......work ok
Fault code clearing......work ok
Freeze frame reading......work no issues
Measured vaules / live data Live data recording......work without issues
Diagnostic protocol printing......work ok
Actuator tests , test components via direct ECU access......work ok
Key programming......work good
Service reset......work fine
DPF (Diesel Particulate Filter) regeneration......fine
EGR (Exhaust Gas Recirculation) self-test......work ok
Airbag programming......work ok
Injector programming......work ok
Power Steering calibration......work ok
ECU replacement......work ok
Car configurations......work ok
So, PSA-COM is good at not only basic OBDII diagnosis but some special functions for PSA vehicles.
PSA-COM vs Lexia 3-Citroen Peugeot diagnostic tool
PSA-COM or Lexia 3 diagnostic tool, which better?
Citroen Peugeot diagnostic tools, which one to choose? PSA-COM and Lexia 3, which one is better? Read the chart and draw a conclusion yourself.
| Name | PSA-COM | Lexia-3 |
| Figure | ||
| Price | €84.99 | €75.00 |
| Software | SuperScan | Lexia 3 v48 PP2000 v25 Diagbox v7.76 |
| Operation system | Windows XP, Windows 2000/Vista/7/8/8.1/10 or Linux and Mac OS/X (using Wine emulation) | Windows XP |
| Update | Download sw online | Via CD |
| Language | Arabic, Croatian, Czech, Danish, Dutch, English (US), Finnish, French, German, Greek, Hebrew, Hungarian, Italian, Polish, Portuguese (Brazilian), Romanian, Russian, Serbian (Cyrillic), Spanish, Turkish | English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungarian, Greek, Czech |
| Bluetooth | Yes | No |
| Protocols | ISO15765, PSA2000, Bosch KW71 and PSA2 | |
| Obdii diagnosis | Yes | Yes |
| Actuator test | Yes | Yes |
| Key programming | Yes | Yes, key programming via PP2000 (need luck) |
| Programming (Special functions) | Yes, works good in special functions: Service reset DPF regeneration EGR self-test Airbag programming Injector programming Power Steering calibration ECU replacement Car configurations | No |
| Vehicle | Support: most Citroen and Peugeot cars, Fiat Scudo/Ulysse, Lancia Zeta/Phedra Not support:Peugeot Boxer/Bipper and Citroën Jumper/Nemo, Peugeot 4007 and Citroën C-Crosser | Citroen and Peugeot cars from 1995 to 2014, incl. Peugeot 307 Citroen:C1,C2,C3,C4,C6,C8, C-CROSSER,NEMO,BERLINGO,JUMPY,JUMPER,AX,SAXO,BX Peugeot:from 1995 to 2012 |
So, PSA-COM diagnostic tool wins! It works perfect in Bluetooth connection, key programming and special functions
2017年1月22日星期日
How to choose better Peugeot/Citroen scanner and key programmer?
TOP Best scanner and key programmer for Peugeot/Citroen cars
This blog will give you professional advice on how to choose a better Peugeot/Citroen diagnostic scanner and key programmer. Below is a recommendation list for your reference given by diyobd.fr engineers!
Professional Diagnostic Tool for Peugeot/Citroen Shopping Advice
Option1. Lexia-3 PP2000 Diagbox Peugeot/Citroen diagnostic interface
It supports most of Citroen and Peugeot cars from 1995 to 2014 especially good at working Peugeot 307 and some Citroen C5 models.
It supports read VIN number, read fault codes, clear fault codes, auto-scan etc.
Lexia 3 V48 PP2000 V25 XS Evolution with Diagbox V7.76
It supports read VIN number, read fault codes, clear fault codes, auto-scan etc.
Lexia 3 V48 PP2000 V25 XS Evolution with Diagbox V7.76
Best price only €75!
This Lexia 3 has golden edge PCB with original full 921815C chips and 12pcs 4.5V Relays!
Option2. PSA-COM Bluetooth diagnostic and programming tool for Peugeot Citroen
Best price only €84.99!
PSA-COM Programming Tool is a new launched Peugeot Citroen diagnostic scanner with same function as Lexia 3!
It can access to various electronic control units (ECUs) such as Engine, Gearbox, ABS, Airbag/SRS etc.
It can display identification, read and clear fault code memory, display and record measured values and perform actuator tests.
Learn more information about PSA-COM from here:
Good Peugeot/Citroen key programmer recommended
Best price only €169!
OBDSTAR F108 support read pin and program key for nearly all PSA vehicles after 2008.
Tested OBDSTAR F108 read 2013 Peugeot Partner pin code in less than 2 minutes
OBDSTAR F108 supported car list:
2017年1月12日星期四
psa-com diagnostic tool OBD test OK on Citroen C3 Picasso
It’s a test report of psa-com diagnostic tool for peugeot/citroen, obd diagnosis ok on Citroen C3 Picasso
What is psa-com diagnostic tool?
psa-com diagnostic tool for peugeot/citroen is a good replacement of Lexia 3 PP2000 Diagbox. It’s good at basic obdii diagnostic tests,ECU programming, key making and some other special functions like DPF, EGR, service reset, etc.
Here, take Citroen C3 Picasso BSI DS3/C3
Connect the psa-com diagnostic tool to the OBD port in the car
Run psa-com software
Go to diagnosis
Add a new vehicle
Select the model for diagnosis
Here: Citroen C3 Picasso BSI DS3/C3
Connecting to the ecu...
Read live data
Read trouble codes
...
订阅：
博文 (Atom)