MB 207 all key lost, change EIS with VVDI MB BGA tool

MB 207 all key lost, you need to change EIS, and the idea tool is VVDI MB BGA tool.

Firstly, we need to read EIS old data.

1. Click "Read EIS data", tick off "allow user", then enter Key pass, then click "Save EIS data" to the "207 all key lost" folder, follow the prompt to finish the following procedure.

2. Prepare key file. Click "Load EIS file" then "Prepare Key File"

3. Make new key.

1) Click "Read Write Key" and insert key into EIS;

2) Click "Identification key", reading data success and you will see key is unuse, it is a new key.

3) Click "Load key file" and select "Key1_801DDA38_used_015" to open.

4) Click "Write". Writing success and click "Identification key"

5) Change EIS.

6) Click "Read EIS data", you will see the key1-key8 is new. Then click "Load EIS data"

7) Choose EIS VIN again and click "Write", click "Read EIS data" and remove the tick before "Activated", then insert new key into the EIS.

8) Click "Read EIS data", meanwhile tick off "Activated", you will see Key 1 is used. 

Okay, the Xhorse VVDI BGA tool changes EIS successfully.

VVDI MB BGA Tool renew ESL replace EIS for Mercedes W212 (Review)

Here is a tutorial for using KTAG K-TAG ECU Programming Tool Master to read VAG Audi A3 ECU EDC17C46 on bench. Steps are as follows:

Step1. Open Audi A3 ECU EDC17C46 unit: first heat the edge to soften glue inside then open it carefully not to damage the circuit board.

Step2. Open KATG K-TAG software. Connect the cable 14P600KT02 to ECU connector according to following pin out diagram:

Step3. Take a wire, cut the wire cover at the middle. Solder its two ends to the two pins (red) as follow:

Step4. Back to K-TAG software, choose plug-in “P199” and click “OK”.

Click “Read” and wait it 100% complete. And then save the bin file. Now KTAG ECU Programming Tool read VAG Audi A3 ECU EDC17C46 successfully!

Original:(Tutorial) KTAG K-TAG Master read VAG Audi ECU EDC17C46 on bench

Xhorse VVDI MB BGA outil Benz Key mise à jour du programmeur pour V2.1.4

Update notice: Newest V2.1.4 VVDI MB TOOL Mercedes Benz Key programmer has been released for some days, here is the upgrade information.

Free download link:

https://mega.nz/#!60pXTQpa!P1wP22cbaWHuK0kfg0bBDfPzPuiqUKw8_aZht045CQg

PASSWORD: 123456

Upgrade info:

Require firmware V2.1.4

===== BENZ V2.1.4 =====

1. Warning: All user to update device firmware v2.1.4, software v2.1.4
2. Support get password from w204, W207 EIS lost while all key

How to update ?

Update Firmware

The program will read the newest version from server automatically

Update firmware steps:

1.Connect VVDI – MB TOOL to PC with USB cable

2.Choose VVDI – MB TOOL firmware version from Firmware List

3.Press button Update Online, wait the progress end

4.If failed to get firmware list or get something like “communicate with server error!” while update your device, close antivirus and firewall programs, try again. Change your internet provider once failed again

DON’T shutdown your PC or disconnect USB cable while update device

Update Software

This function require internet support

Use “Menu ->Update Online ->Software Update” to obtain VVDI-MB TOOL latest software version, the software version require firmware version etc.

If there’s no display for software version, shutdown your firewall and antivirusu programs, try again.

Confirm Update Information

This function require internet support

Use “Menu ->Update Online ->Latest Update Information” to obtain VVDI-MB TOOL latest update information

If you want to get more information about VVDI MB BGA TOOL, please visit here:

http://www.obd2france.com/wholesale/original-xhorse-vvdi-mb-bga-tool-benz-key-programmer-including-bga-calculator-function.html

Original:Xhorse VVDI MB BGA outil Benz Key mise à jour du programmeur pour V2.1.4

Do All Keys Lost on Mercedes W212 with VVDI MB VAG Tool

This blog provides the speific steps on how to use VVDI MB BGA tool to do all key lost on Merceds W212.

Vehicle model:

Mercedes Benz W212

Video guide:

Detailed instruction:

Select Password Calculation

Select Classes W166,197,212,218,246

Click Data Acquisition

Connect”device OBD line” to car before continue

Connect “IR adapter”to VVDI-MB TOOL before press OK

Processing data acquisition

Save VM_NOKEY_C051128E_1

Acquisition finished, upload the saved data with “Upload Data” for password.

Click upload data.

Upload success: Queue number 1, require about 1 minutes to finish

Tick Auto Reflash, click Query result.

Reflashing, please wait…

Creat new folder named “212 ALL KEY LOST”

Find correct password. Don’t require data acquisition. Use the password in key password area.

Select EIS tool

Click Read EIS data

Paste the key password

Click save EIS data. Save to the new folder “212 ALL KEY LOST”.

Press OK to save HC05 fomat file.

Select Prepare Key File

Press load EIS file.

Save in “212 ALL KEY LOST”

Prepare keys

Select Read Write Key

Plug the new key in the device

Identification key and reading data success

Click load key file key8_5F6FD781_051

And write data and identification key

Select EIS toolsand read EIS data.

Done!

This is from obd2france.com website technical support: Do All Keys Lost on Mercedes W212 with VVDI MB BGA Tool

Xhorse VVDI MB BGA Tool what works and not works

No so expensive and have BGA password calculation

VVDI MB BGA Tool product no so expensive why not ask mi and nec prog 57 and diagsped lower price minimum 6000 euro with price between 100 and 200 eurp password calculation.

When this tool comes out with accepted price all ask about free password calculation

I am sure that this tool will be number 1 in market

Xhorse VVDI MB BGA Tool what works:

1. Test nec soket for reading KEY ROM 57 nô problem

just when need write not possible, via Ir Is ok

2. Test password from 212 new model super, good tool need pay 2 tokens, need 10 min all ok

3. All key lost: its only about EIS type, Xhorse Company have tested W166 W246 W212 FBS3 all key lost ok.

Sure it can do all key lost on w212 as the same as Mehaco /nec pro51/ mercedesinstrument, but cheaper.

4. MB BGA Tool support erase keyless-go rom08, and I tested it works already done 20 of them.

Xhorse VVDI MB BGA Tool what not works:

1. So what about w204 w207 w246, can BGA tool do all key lost?

W204 and w212 eis are different. Yea on fbs4 nothing can be made. But 2010 w212 is fbs3.. so all keys lost sure is posible on this model..W204 facelift has fbs4 and it comes without esl/elv so another way to distinguish it.

Parts of 2014 & Mostly model of 2015 (and after 2015)is FBS4,currently cannot support FBS4 type.

User can Auto detect the EIS.if can detect the type but can't read the EIS data,should be FBS4.

I use VVDI MB BGA tool test read data with obd2 210 k line working and 204 car read with obd 2 but 211 not read with obd2.

Cable connect

16 12v

4+5 GND

14 CAN_L

6 CAN_H

pin 1 : ESL 1

pin 2 : GND

pin 3 : +12V (30)

pin 5 : CAN L (White)

pin 6 : CAN H (Green)

pin 7 : CAN L

pin 8 : CAN H

CAN ANY ONE TEST

Solution:

read eis via obd for W164, W169, W211, W209, require gateway connected, I mean read while EZS is connected to the car, If you test on bench, also need to connect gateway.

Considering I cannot ask customer or mechanic to send me also gateway for make a keys ,in many cases MB owner send us the eis .

You can read old EIS Motorola type by K line only but not obd like 208 209 210 211 and 220 using vvdi.

Ceci est Programmeur De Clef du support technique du site Web www.obd2france.com:Xhorse VVDI MB BGA Tool ce qui fonctionne et non pas des œuvres