显示标签为“xs evolution”的博文。显示所有博文
显示标签为“xs evolution”的博文。显示所有博文

2017年6月21日星期三

Lexia vs Diagbox vs Peugeot Planet PP2000

This write-up explains what the difference is among Lexia, Diagbox and Peugeot Planet PP2000, which would be a good idea for a total newbie in car diagnostics software that Lexia 3 cable required.
Both Diagbox and PP2000 are used to connect to the car's ECU and carry out diagnostics and manage settings. Which is a better software, however?
Lexia: Citroen, Planet: Peugeot, Diagbox: Citroen & Peugeot
Lexia3 - hardware
Lexia - Software for Citroen
Planet - Software for Peugeot
Diagbox - Front end which contains variations of both of the above
Diagbox is the only one which is still updated.
The hardware is currently on Revision C.
Diagbox: newer, PP2000: quicker
PP2000 and Diagbox are roughly the same thing , Diagbox being the newer software ,
PP2000 is a quicker software but will become obsolete over the next few years as Peugeot will stop using it this year ,
no point in getting PP2000 then having to change to Diagbox
Peugeot Planet: easier and faster
I have planet and also being a newbie installed planet then diagbox they both worked fine though diagbox was a lot slower (you have to start diagbox then choose planet off the option list) so basically if its just for use on your own car then using planet on its own is easier and faster though if your going to attempt using the interface on other vehicles may as well install diagbox with planet and lexia
Lexia + PP200 = Diagbox
lexia is for citreon
planet pp2000 is for peugeot
put both programmes into one software = diagbox
if your going to buy it you might asswell get diagbox which most new interfaces come with anyway.
Both Lexia & PP2000 available within Diagbox
They are the same.... the discs supplied usually contain PP2000 and Diagbox on one disc (PP2000 is also available within the Diagbox installation), and lexia for Citroens on the other. Lexia is also available within Diagbox.
So if you find an interface with rev C, the software discs will contain everything you need and more.
PP2000 on 32-bit, Diagbox on 64-bit
Planet will only run on 32-bit. Diagbox will run on 64-bit, but when you try to call Planet through Diagbox it will crash because it must have 32-bit.
What I do is install VMWare Player (free). Using that, create a virtual machine XP SP3 32-bit (you will need the disk and key). Then install Planet into that. Works well. Sounds very techy, but it is surprisingly easy, because VMWare is so well documented. When installing Planet, do not plug the Lexia interface in to the PC until prompted.
Planet & Diagbox are software Lexia cable required
The Lexia is the cable required to use the software. Only the cable.
To use the cable you will need software as well, Peugeot Planet and Diagbox are the 2 pieces of software to choose from.
Diagbox is much newer software that supports even the latest cars. However I prefer the interface of Peugeot Planet, much easier not to get lost in there.
Generally when you buy a Lexia software will be included on a disk. As to whether it is genuine or not, you should check with the seller before purchase.

2017年4月4日星期二

Free download Lexia3 PP2000 Diagbox 7.02 to 8.26 ALL versions

Lexia3 PP2000 Diagbox all versions here! You can free download: Diagbox 7.02, 7.06, 7.07, 7.08, 7.11, 7.16, 7.24, 7.40, 7.58, 7.60, 7.62, 7.63, 7.64, 7.65, 7.66, 7.74, 7.76, 7.77, 7.82, 7.83 (8.19), 8.20, 8.26.
Free download Lexia 3 Diagbox 7.02 to 7.82:
https://mega.nz/#!dgpF0CDJ!yjaVbuP7bllDTitn8KAzTVS2ey2Z8KUsNPUdWO2mgq8
No pass
Free download Lexia 3 Diagbox 7.82 to 7.83 (8.19):
https://mega.nz/#!IhNFmYrD!GLyERFpKftKAAaHN8mwAzI6p4mqMS9pVSw7EG1gCUM0
Password: Very Simple!
Free download Lexia 3 Diagbox 8.20 to 8.26:
https://mega.nz/#!kkNEmbpR!iTkm4OVDfgTDWRjg3c_-TIWJQnr185jvzN2bML07tlU
No pass
Please note before you download:
Tool recommended work with Diagbox:
 
All Diagbox free download links are tested working, no dead links!
Download and enjoy at you own risks!
Tested safe and working well Lexia 3 Diagbox 7.76 only €6.99!

2017年4月3日星期一

How to program Peugeot 307 remote key by Lexia 3 Diagbox?

Do you know how to program Peugeot 307 remote keys by using Lexia 3 Diagbox? Check below steps!
Step 1
Connect Lexia3 Diagnostic Scanner Tool with Peugeot 307 via OBD2 port.
Turn ignition on and open Diagbox software.
Select car brand “Peugeot”.
Select car model “307”.
Step 2
Go to “Diagbox” and “Repair”.
It will automatically do a Global Test to all car modules. After that you click “BSI” control unit.
Then choose “Configuration”, “Learning” and “Programming of keys” as below:
  
Step 3
To program new keys, you need car pin code.
Enter pin code as “BSI Confidential Code” then follow the tip to enter it again.
Next you can enter the key number you want to program.
Step 4
Follow the instruction: turn ignition off then within 15 seconds you should insert the new key to turn ignition on.
New key#1 is programmed OK. Turn ignition off and remove the key.
Insert new key#2 in ignition, turn ignition off then within 15 seconds you should insert the new key to turn ignition on.
In this way, you successfully program new remote keys for Peugeot 307 using Lexia 3 Diagnostic Tool!