The Key
Pro M8 as a powerful locksmith diagnostic tool supports you to add
& make new keys for full range of worldwide car models. Following guide is
for Key Pro M8 make Hyundai Santa Fe
Key. Hope it helps.
First, you need a Key
Pro M8 auto key programmer. Key Pro M8 with newest software Standard
version V11.13, Beta version V11.17 is available at
If you already owned this device, please go straight
following steps:
Step1. Start Key Pro M8, click “Standard Software”
then input password to unlock it. There is coming a warning message and next a
tip for remaining tokens, all press “Enter” button.
Step2. Vehicle Selection Menu: Choose “Hyundai”→“Euro”
→ “Proximity” → “Vehicle”→ “Santa Fe”. After that screen will show an image of
the security calculator, click “√” at right bottom corner.
Step3. Key Pro M8 will show you code, input it into
calculator, and you will get result, input the result code into Key Pro M8,
then click“√”.
Step4. The screen will show “Hazards on/ ignition off”,
follow this tip to turn off ignition. Now just wait a minute Key Pro M8 is
trying to communicate.
Step5. ECU Identification Menu: press “Enter” button,
choose “Special Functions”→ “Program Prox. Key”. It will show you “One token
will be used”, click “√”. “All keys will be cleared, continue”, click “√” to
continue.
Step6. Key Pro M8 will show “Insert prox. key into
slot”, then do as follow picture (The slot is beside driver’s seat), press “Enter”
button. Enter security code.
Step7. The screen will show “NO OF PROX. KEYS REQD,
MAX PROX.KEYS=2”, click 2, click “√”. Wait a minute.
Step8. The screen shows “Remove prox. key”, plug out
the key from slot, press “Enter” button. It shows “Insert next prox. key into
slot”, plug in another key, press “Enter” button.
Step9. Wait and you will see tokens are reduced. That
means you succeed in making new key for Hyundai Santa Fe. Plug out the key, things
done.
This
is from OBD2 Francais website
technical support:
没有评论:
发表评论