四月 2017-obd2diy.fr

2017年4月20日星期四

How to update XPROG-M V5.0 without dongle to XPROG-M V5.74?

Here is a guide to show how you update XPROG-M V5.0 Box ECU Programmer without dongle to XPROG-M V5.74! Note: You try this method with luck and your own risk.

You also need: ATMEGA64 Repair Chip update XPROG-M

Free download XPROG Box V5.7.4 software:

https://mega.nz/#!PQUzGAKI!LuBfkREVI9vnjPtPKlhdjbv6welC8GkHoZM4Bm9wois

Free download XPROG Box V5.7.4 setup exe:

https://mega.nz/#!vUknWAaZ!VwXXnaREXg4oRFRUYkvmPpkdEyj6ILX4hiEL3obYhMg

XPROG-M V5.0 software update to XPROG-M V5.74 guide

Unzip the XPROG 5.7.4.zip contents to a folder on your desktop.

Open the folder AVRDUDESS and run avrdudess.exe program.

The following procedure will flash the version 5.0 firmware on your XPROG device.

Select your programmer.

Click on “Detect” at the top right corner. It will detect ATMEGA64.

Select your flash file which is in the Firmware folder.

Select your EEPROM file which is in the Firmware folder.

Enable the “Erase flash and EEPROM (-e)” option.

Set the following in the “Fuses & lock bits”

L: 0x2F

H: 0xCA

E: 0xFF

LB: 0x3C

And enable the “Set fuses” and “Set lock” options.

Finally click on “Program” and wait till it finishes and verify all the data are flashed correctly.

If not then try again.

Now that the Xprog has version 5.0 firmware, go to the “XprogDesktop” folder and run “XprogDesktop.exe” file.

Click on “Help->Hardware info…” and once it opens it will ask to upgrade the firmware.

If not, then click on the “Upgrade” button. Once this procedure is finished you can try and read a processor. It will ask for a certificate. If it fails try again.

When it is finished the XPROG will run the latest firmware and you will be able to work with the latest XPROG V5.7.4 software!

Again note that this is not a 100% successful guide, some work and some may not.

If you need 100% tested working latest XPROG-M Programmer that will work almost the same as XPROG-M V5.74, get this one:

XPROG-M V5.70

XPROG-M V5.70 read Freescale MPC55xx

XPROG-M V5.70 read Freescale MPC560x

2017年4月18日星期二

How to install Volvo Vida/Dice on Windows XP VMWare Player

I can confirm that Volvo VIDA 2011A will work in Windows 7 (Ultimate, BTW). But with the following conditions. You need to run IE8 not 9 (I have found that VIDA just won't go with 9), minimum RAM is 2G. Should be good to go with that; but since MSSQL, which VIDA requires is such a hog, other conflicting apps could create issues. Volvo obviously recommends that a VIDA box be used exclusively for that purpose with no other apps installed. Realistically, I have also installed MS Office, Adobe Acrobat and Lightroom, and some Nikon software without creating a problem.

Actually, running a VM is maybe a good solution to avoid collision with other parts of the installed software. As you know, a VM is like a dedicated computer with nothing else installed on it. Another benefit is to use it on your newish computer which is faster (of course VM will steal some performance but I've noticed no problems with VIDA level software which is not a very demanding software)

VM also adds a little more clunkiness on UI having to swing between 2 windowing/operating systems and deal with assigning the mouse+USB inputs between the 2 operating systems. But its not too bad really. Once inside VIDA, one is staying there to work for awhile.

My setup is a 2008ish Macbook Pro (not fast by today's standards) with VirtualBox Windows XP VM. I run both VIDA DICE and Toyota Techstream (for our Prius) on the VM with no problems. I actually just leave the VM always up and running so its like having my car diagnostic computer available all the time.

This said, VM does require a little more computer skills for setup. Probably about the same skill level to solve interference with other software installs. For someone with less computer skills, it seems a dedicate computer running Win XP is probably the easiest fool proof path.

Here is what I would do: Get VMWare Player (Free http://www.vmware.com/products/player/), which is a virtual machine software. VMWare Player does not allow you to create new virtual machines, just open previously made ones.

Next, find a Windows XP Professional VMWare image. This is more than just an install disk - this is a full already installed image of XP Professional SP3.

Open the XP image with VMWare Player, boot XP in your virtual machine, and install VIDA on that. You need to connect the USB DICE through to the Virtual Machine, see the help/tutorial to learn a little about VMWare player.

The huge advantage of this method is everything dealing with VIDA is completely isolated into that virtual machine. Thus you don't need to worry about what else you have installed that will mess up vida, viruses hidden in any of the SW you've acquired, etc. The only thing you are installing on your main PC is VMWare Player, which is very trustworthy.

You can even enter full-screen mode, which will make it seem like you are running the real XP.

The whole process should be very painless & simple, the only thing you are missing right now is a VMWare Image of XP Professional. If you want you can try installing XP from the installation disk you already have using VMWare Player, which requires a bit more work, see e.g.:http://johnbokma.com/mexit/2005/10/26/vmware-player-windows-xp.html .

-Colin

PS: VMWare Workstation (basically full version of player) is excellent SW, I've used it for many years now in a variety of environments. So I would have no hesitation using the player edition, but I honestly haven't tested the above with VMWare Player only. The Microsoft VM that comes with Windows 7 is a joke by comparison.

2017年4月17日星期一

How to use ACTIA Multi diag I-2016 Win XP for Passat VII diagnosis

ACTIA Multi diag I-2016 update... Here you go.. About how to install and use Multi diag I-2016 software for vehicle obd2 diagnosis.

I-2016 actia multi diag price: €269

LOWER cost with actia multi diag I-2011 I-2014 I-2015

How to install ACTIA Multi diag I-2016:

CANNOT connect to the Internet when install the multi diag software

NO need actia multi diag keygen

NO need actia multi diag activation code

MUST use with actia passthru driver

How to use Multi diag I-2016 for diagnosis on Volkwagen Passat VII (2011-2016)

In the computer management

Select Device manager->I+ME ACTIA XS Device-> PassThur+ XS USB Driver

Select a car type: All systems- vag diagnostics

Multi-Diag I-2016 is tested to work no issues!

Actia multidiag works good at:

All maintenance and repair operations

- Reset maintenance indicators

- Read/Erase fault codes

- Read parameters (graphical representation)

- Test actuators

- Configure the calculator,

- Coding (Injectors, electronic tire valves...)

- Calibration and self-learning... Etc.

Diagnose the main vehicle systems: injection, ABS, ESP, Airbag, automatic transmission, air conditioning, central computer, dashboard, comfort systems, tire valves, immobilizer, direction, steering, etc…

Connected Services:

Connecter "Actiaconnect.com" to receive personalized information and access the many online services:

- Latest Updates Vehicles and Systems

- Online Help Topics

- Support requests directly by e-mail

- Remote control of your tool

- Accessories available to complete your Multi-Diag equipment

- Track your online subscription

- Technical and commercial information to fully exploit your diagnostic station

Multi-Diag I-2016 car list:

Covers more than 45 brands:

Alfa-Romeo, Audi, Autobianchi, BMW, Cadillac, Chevrolet, Chrysler, Citroën, Dacia, Daewoo, Daihatsu, Fiat, Ford, Honda, Hyundai, Jaguar, Kia, Lada, Lancia, Land Rover, Lexus, Maybach, Mazda, Mercedes, MG, Mini, Mitsubishi, Nissan, Opel, Peugeot, Porsche, Proton, Renault, Rover, Saab, Seat, Skoda, Smart, SSangyong, Subaru, Suzuki-Santana, Toyota, Volkswagen, Volvo, Zastava…

2017年4月16日星期日

VAS 5054A ODIS 4.0.0 Question and Answers (FAQ)

FAQs of VAS 5054A ODIS 4.0.0... Here you go.

Where to download odis 4.0.0 for free?

Odis 4.0.0 download on Mega

free download Odis 4.0.0

new ODIS-S 4.0.0 ONLY no launcher

ODIS 4.0 + Postsetup +launcher + Keygen+ licence.rar

ODIS 4.0.0 torrent without password

Odis v4 work with all vas5054a china clone?

Odis v4.0.0 have been tested with almost 5054a china clones, but it cannot work work with all the devices.

Here is the VAS 5054A ODIS 4.0.0 test report, successful or failed.

sp33..................WORKED

http://www.obd2france.com/wholesale/vas-5054a-vw-audi-diagnostic-tool.html

sp33-b...............WORKED

http://www.obd2france.com/wholesale/vas-5054a-vw-audi-bentley-and-lamborghini-multi-language-diagnostic-tool.html

sp33-bo.............WORKED

sp33-e...............WORKED

sp33-d................NOT worked

sp33-c................NOT worked

(tested via obd2france.com)

During install of ODIS 4.0.0 it only offers VAS 6154 or PassThru.
Does anyone know if it still supports a VAS 5054a if we choose VAS 6154 during the install?

Yes can be suuport 5054a head

During install should we choose VAS 6154 then and not "Passthru"?

Just use default device.
VAS5054a is working good with ODIS 4.0.0.

How does one go about getting the VAS5054a head to work with ODIS-S 4.0.0? I cannot get it to connect. It is seen in device manager in windows 10 but under "extras/diagnostic interface" in ODIS-S, all I have as options are VAS6154 and pass through. Everything worked fine with ODIS-S 3.1.3.

ODIS v4 in WIN 10 does not support VAS5054 anymore, if you want to get the VAS5054A head to work with ODIS v4, then try WIN7.
BTW ODIS v4 is more friendly in WIN 1

How to install ODIS 4.0.0 on Windows 10?

I can confirm that the VAS5054a definitely DOES NOT work under windows 10. When running under windows 7 Vas5054 and Vas5055 are available as options along with the newer VAS6154 and passThru.

I tried compatibility mode and even sniffed the registry to see if it queried a version key and it doesn't appear to do so. I copied the software drivers from my Win7 install and placed them in the correct directories but this didn't work as the installer must build the environment after its checks. I can see in log files on windows 10 that it actually "uninstalls" the SOFTING drivers if they are on the machine in the ODIS-S folders...

Looks like anyone out there wanting to run ODIS on Windows 10 natively will be stuck with 3.1.3 in compatibility mode or Windows 7 with ODIS 4.0.0

Anyone knows if the post setup are different for USA and euro market ?

The PS is different for Eu vs. Usa since Odis v3.x.x

I tried several times to include multiple brands. It looks as licensing is the problem and post-setup update is not picking up brands other than the one that is licensed.

To fix the license issue you need to go into the installation directory and open license location with notepad++ and make the change like you did to the installation directory for e.g. (...... AU or ....... VW)

or just use X-COPY and make a single starter file with choices.

Volvo VIDA 2014D 2014C 2014B 2014A Download FREE (No Pass)

Free download VOLVO VIDA/DICE 2014D 2014C 2014B 2014A and get how-to’s of installing Volvo VIDA software on Windows 10 windows 7

Volvo VIDA 2014D torrent download: free

https://mega.nz/#!WBYRmZRB!EKe7kVBRpKgUXvFPqkCzagdBL6S3KFQxSs6bGYKLycM

Volvo VIDA 2014D: tested 100%, safe to use

http://www.obd2france.com/wholesale/vida-dice-diagnostic-tool-2014d-update-software-cd.html

VIDA 2014D cable: working fine

http://www.obd2france.com/wholesale/mangoose-for-volvo-vida-dice-diagnostic-cable-1712.html

Volvo VIDA/DICE 2014D: working perfectly

http://www.obd2france.com/wholesale/volvo-vida-dice-diagnostic-tool.html

Downloadthe volvo vida dice the Ewd Diagrams 2014C multilanguage: free

https://mega.nz/#!uUAQlTQQ!o4LS5Zcd0HTzHqx6jY6plqgUslQrB0iW4CjztwmoNV8

Free download Volvo VIDA 2014B + WIRING DIAGRAMS DVD

VOLVO VIDA 2014A: free

https://mega.nz/#!gBEkwA4b!DmA3U6ys3I1MZZV8hHYiz--_mwBv5JqxW52ifdKPOfA

WIRING DIAGRAMS: free

https://mega.nz/#!1EtDwDZa!PuK-6gigKpisLs9Qb6dPt3m6ImieS9qam0CxheVIsF4

In the VIDA dvd there's all the necessary for running vida, SQL, net framework,patch,install instructions,etc. tested on IE9, works like a charm

Language:Multilingual- French, German, English, Italian, Japanese, Korean, Netherlands, Portugal, Russia, Sweden, Thailand, Turkey, Chinese

System Information: Windows 7 Pro / Ent (x64), 4Gb RAM

What is VIDA?

VIDA => Vehicle Information & Diagnostics for Aftersales

The program for the diagnosis, finding spare parts, contains step by step instructions on how to repair cars Volvo.

How to install VIDA/DICE 2014D on Windows 10 pro 64 bit?

http://blog.obd2france.com/2016/09/20/how-to-install-volvo-vida-2014d-on-windows-10-pro-x64/

How to install Volvo VIDA 2014D on Windows 7?

http://blog.obd2france.com/2015/11/10/telechargement-gratuit-volvo-vida-dice-2014d-et-win-7-linstallation/

Can this be used to program Automovtive Keys for Volvo Cars in North America?

Programming keys requires a software purchase with a legitimate VIDA station. So the answer is no.

What can i do with Volvo vida 2014d?

http://www.obd2france.com/wholesale/volvo-vida-dice-diagnostic-tool.html

Enjoy!

(Review) Volvo VIDA/DICE 2014D Windows 7 32bit: 100% OK

A couple of weeks ago the car suffered a spurious DIM fault which left me with a SRS alarm standing. Unsure of what faults may be laying in wait and in order to clear the SRS alarm, I ordered a VIDA/DICE unit from this site:

http://www.obd2france.com/wholesale/volvo-vida-dice-diagnostic-tool.html

I know that VIDA/DICE is a big issue on the forum and has been covered many times, but I wanted to put down my experience while it is still fresh in my mind, and that it may help any out there who are struggling or are wondering whether to get a unit or not.

Once I got the VIDA/DICE unit I set about looking at the numerous posts that had been put on various forums, and I realised immediately that this was not going to be as easy as most software / hardware you buy off the shelves. However. my first challenge was to find a laptop with Win 7 professional on it. Luckily my son had a large desktop / laptop with it on and he let me do a fresh install and update. I then followed a YOUTUBE video for installation. (No instructions came with the device at all).

Following along, I got Volvo VIDA 2014D installed OK. I then rushed out to my car to try it out. When I plugged the DICE into the computer it searched for the drivers and eventually recognized the device. I then started VIDA, but it would not see the DICE unit. Just a box with a Red X in it.

OK so back to the forums to see what people did about that. I must have tried innumerable combinations of things and I was about to give up. As a last ditch effort I dug out an old Toshiba Laptop I had. This only had Vista Home Premium on it, but it was a 250GB drive, 4GB of RAM and an Intel Core DUO processor (P8600) which was way below the spec of my sons laptop, but adequate for VIDA. I searched on the WEB for the cheapest WIN 7 professional license I could buy and got one.

I loaded the 32 BIT version as this is all the laptop could cope with. Followed some of the tips I had picked up on the forums, and loaded VIDA back up again. I went out this morning in the pouring rain to try and connect it to the car - hey presto - it worked. I have checked and cleared down the faults, including the SRS alarm. I am a very happy man. So below is the setup I used which worked for me and I hope it helps someone else out there who has been struggling.

I purchased a VIDA / DICE unit with the latest 2014D software. The VIDA unit has multicoloured lights on it. I had read on the forums that there were some out there with only Blue Lights and seemed to give problems.
Use WIN 7 professional 32 Bit and let windows do a full update (takes ages). You will certainly need to ensure that service pack 1 is installed. When mine was loaded and updated, it only had Internet Explorer 8 on it. I had to download and install IE9. VIDA 2014D would not load with only IE8 in place.
Download the latest version of JAVA
At this point I created a restore point in windows, so I could revert to this point should I have problems installing VIDA.
I then turned off User Account Control (UAC) and disabled the Windows Firewall.
Check that the only version of .net that you have is .NET 3.5. I had read that if you are on version 4 VIDA doesn't like it. (You can check the version in the registry editor in Windows)
I then loaded VIDA following a Youtube video
Once VIDA was proven to work, I then took the laptop out to the car and connected the DICE unit to the OBD2 socket and plugged it into the laptop. Windows searched for the drivers and installed them. When I opened VIDA up, I needed to enter all the car details in the Vehicle Profile section. This time the page also showed my DICE unit in the DICE configuration Box. With the vehicle details entered, the Diagnostics TAB activated and as long as the Ignition is in the II position, it will read all the onboard computers.

Why didn't this work for me the first time I tried it? I think it might be that VIDA / DICE didn't like the 64Bit version of Win7 Pro, although others may have got it working on that platform. I also think I got in a mess with the .net 3.5 vs the .net 4.5.

My thanks to all those on various Forums who have posted up their solutions. Most are for earlier versions of VIDA, and I didn't see many for the 2014D version that I bought.

It has been a long week messing around with this, but I am currently walking on air.

One final tip - while messing around with VIDA 2014D on the car the ignition is on. I would put the battery charger on while in this state as the battery soon runs down. I'm currently waiting for it to charge up so I can start the car!!!

Good Luck!!

How to read Renault Megane Bosch EDC16CP33 BDM by KTAG clone?

This blog will show you step by step: How to read Renault Megane II Bosch ECU EDC16CP33 in BDM bench by KTAG ECU Programmer Master Clone? Check below details!

ECU to read: Renault Bosch EDC16CP33

You can see this ECU type installed in Renault, Nissan and Suzuki. EDC16CP33 and EDC16C36 are the same just if CP33 you can’t read the MPC.

Tool used: KTAG 2.11 FW 6.070 or you can try KTAG 2.13 FW 6.070.

BDM Frame used: KTAG FGTECH BDM Frame Bosch

K-TAG BDM read Renault Bosch EDC16CP33 ECU steps:

Connect K-TAG with EDC16CP33 ECU via KTAG BOSCH BDM Frame as below:

Open K-TAG 2.11 software and click the car icon.

Select car maker “Renault”, car model “Megane II” and ECU type “BOSCH EDC16C36” as below:

It’s recommended to do ECU backup before reading.

Then choose the first option “BOSCH EDC16+ NISSAN RENAULT (P29)” and click “OK”.

Click “Read” and KTAG starts to read EDC16CP33. (Not MPC, only flash and eeprom)

Now you just wait it complete 100% and save the bin file!

KTAG Clone BDM read Renault BOSCH EDC16CP33 OK!

How use KESS V2 2.32 to read write Renault Sandero EMS3120?

Good news for sharing: 1. KESS V2 clone Ksuite 2.32 now is available! 2. Newly tested OK to read 2014 Renault Dacia Sandero SIEMENS EMS3120 ECU by KESS V2 2.32!