Xtuner-E3 wifi diagnosis OK on Honda Accord

A new test report of a new Vpecker easydiag scanner - Xtuner E3 full diagnostic tool on a Honda Accord. Works good in OBD2 diagnosis through wifi / bluetooth.

First, check the communication

connect the XTUNER-E3 scanner with the car.

the indication light turns redafter connection,

check the connection of Wi-Fi or Bluetooth

if connect successfully, the indication light will turn to blue.

Then, go to diagnosis

Run the XTUNER-E3, and start to diagnose.

Choose the vehicle, and enter the diagnostic system:

press next page.

Read ECU Information

Read DTCs

Erase DTCs

Data List

Select some items here:

Select the 1st item, and click the Wave button:

Click on the Record button to start data recording, until and click on the Stop button to stop recording:

Click on the Play button, it will show the recording data list, select one of them and replay the recording data:

...

Other functions will be tested and reported here ( functions incl. Inspection, TP Position Reset, etc..)

Original - from obd2france.com obd2 francais:Xtuner-E3 wifi diagnosis OK on Honda Accord