Citroen C4 read pin code+ program key by XTOOL X100 PAD2 guide

How to read pin code+ program key for Citroen C4 by XTOOL X100 PAD2?

This blog will show you how to read pin code and program new key for Citroen C4 by XTOOL X100 PAD2 Key Programmer. Check below to start step by step!

XTOOL X100 PAD2 read Citroen C4 pin code steps:

Connect XTOOL X100 PAD 2 with Citroen C4 via car OBD port. Choose “Immobilization” then select “Citroen” and “Citroen V26.42”.

Choose “Read Security Code” function.

Turn ignition on with a working key and wait 12 seconds.

Turn ignition off, press OK and turn it on again. Follow the tips to turn on and turn off car ignition several times. Wait about 3 minutes until it say read out the security.

Now XTOOL X100 PAD 2 read Citroen C4 pin code “7XEQ” successfully!

XTOOL X100 PAD2 program Citroen C4 new key steps:

Step1. Go back to “Citroen V26.42”, hit “Program keys”, “Select from vehicle” then choose “C4”.

Step3. There are two options on C4 menu: “Non smart key” and “Smart key”. Choose “Non smart key” then “Program keys”.

Step4. It remind you if continue all keys will be erased and you should enter correct pin code. Hit “OK” then “Yes” to confirm.

Enter the pin code “7XEQ”.

Input the key number you want to program.

Step5. Now follow the tip, turn ignition off then insert the new key in 15 seconds to turn ignition on.

Program success! In this way you can add Citroen C4 new key by using XTOOL X100 PAD2 Tablet Key Programmer!