(Tested OK) MPPS V18 China Clone read and write ECU results

Here is a collection of MPPS V18 Clone read write ECU test OK results. Below are details. Hope it helps you!

MPPS V18 ECU Chip Tuning Tool Tested OK to Read& Write:

I use MPPS V18 China clone, EDC17C10 PSA boot mode read OK 3:30min - faster than Ktag, Kess and FGtech EU clone!

Today try MPPS V18 read Land Rover TD5 ECU and download 16kb file only. But I know 16kb file is normal with MPPS. It is map area, so all needed for tuning is inside the 16kb, read and write about 10seconds.

Mitsubishi Pajero 3.2l did Denso 4M41 R/W ok

Suzuki Vitara HDI EDC15C2 R/W ok, DTC deleted automatically before read.

OPEL Signum PSG16 2.2CDTI read out as a Zafira through OBD all OK.

Opel Corsa 1.3cdti Marelli mjd6 ECU reads writes ok (OBD). Only did a data area not full read, 3-4 minutes read and 3 minutes to write back.

Astra H Denso Z17DTJ R/W CAN - ok

SEAT ME7.5.10 R/W K-Line (cat_off) – ok

MPPS V18 ecu flash tool Magneti marelli 6F0 full read/write by OBD MPC, flash EEPROM OK!

Golf 1.6 TDI Siemens Simos PCR2.1 R/W can (unlock boot mode-ok) – ok

Tested on an OPEL Corsa Z10XEP Bosch med1.1.5, write in slow but ok

Note: All above test results are tested by obd2france.com customers and forum guys. This blog just post to let you know and will not be responsible for any risks.

It is from auto ecu program  supporting:(Tested OK) MPPS V18 China Clone read and write ECU results