Here is a step-by-step BMW VO coding tutorial: How to modify BMW F10 VO Vehicle Order by latest E-Sys3.28.1 and BMW ENET Coding Cable?
Check below for more info!
What you need for BMW VO Coding?
- Download newest BMW E-Sys 3.28.1, free link is here:
https://mega.nz/#F!tc00gSIb!QSJatG3d3e4JVaDMt2aIhw
Link is working!
No pass!
- Get a cheap €99 BMW ENET Cable to connect E-Sys with your car.
How to do BMW VO Coding? (Steps)
Step 1
Connect your Bimmer with E-Sys 3.28.1 software via BMW ENET Cable.
Open E-Sys 3.28.1 and first select the target chassis.
Step 2
Go to the “Expert Mode”, choose “Coding”, click “Read” button to bring up the FAList.
Click the “Save” button to save the file to any folder on your computer for next editing.
Step 3
Choose “FA-Editor” then open the FAList file as below:
Open the “FAList” folder on the left and expand it until you see the “SALAPA-element” folder.
You can see many codes they respectively mean the values of the function into the vehicle options.
For the codes meaning you can check this picture:
Now you can delete or add FA from the bottom left window.
Then click the apply changes icon as 2 and click button as 3 to save.
Step 4
In this step you need to upload a list of vehicle options stored in My Computer to your car.
Choose “VCM” below “Expert Mode” menu and open the FAList file as below:
New FA must be verified before it can be written to car.
So right click on FA folder and choose “calculate FP”. FP is a vehicle profile.
Expand the SALAPA-Element folder and check the option codes you entered are correct or not.
Step 5
After checking you can upload a list of vehicle options to your vehicle.
Select VCM “Master” tab at the bottom and click “Write FA FP” button on FA FP section.
Now you successfully change the FA, that is to say BMW VO Coding procedure is basically complete.
Step 6
To fully complete it, you also need to activate the option value you changed.
For example, if VO coding edited function related to FRM module, you should initialize the FRM module and activate its value with coding.
You need to activate FA, read SVT, select FRM module then click “Code” button.
www.obd2france.com all rights reserved, Original Article url:BMW VO coding: How to edit BMW F10 VO by E-Sys+ ENET Cable?
