FNR Key Prog 4-in-1 program Renault Laguna II key card easily

This blog will show you how to program new Renault Laguna 2 button remote key card easily by FNR Key Prog 4-in-1! Steps listed as below:

First, plug FNR Key Prog 4-in-1 key programmer into Renault Laguna OBD2 port.

Renault Laguna OBD2 connector is inside central console, remove cover behind the ashtray you can see it.

And insert the dongle it will come with the package.

Next, open FNR Key Prog 4-in-1 software. Click “Diagnostic” icon and select car model: “Laguna/Espace/Velsatis”.

Click “Connect to select vehicle”.

Then it will show you key ID information and pin code as below, click “Start Program”.

Follow the tips: make sure to remove all key cards from the reader. Click “OK”.

Pin code is accepted. Click “OK”.

Insert the new Renault Laguna key card you want to program then take it out. Click “OK”.

You will see message show “Procedure successful”, wait 2 minutes then check whether the new key is working or not.

Insert the new key card and test it start the car OK!

You successfully program a new Renault Laguna II key card by using FNR Key Prog 4-in-1 for Nissan Ford Renault!