How to download and save ecu data in Renault CAN CLIP

I have the reprogramming feature with the can clip v160. I cannot see where to download and save the existing ecu data as a file. either as a backup or to save and send off for remapping.

And here is all user suggestion... Should be ok i think. Wish tips below help anyone also.

Why cannot see the option (download & save data)?

Because in your renault can clip software, there exists no option of this.

What is needed for download & save data in renault CLiP?
You need another cable for that.

Use ren k line tool (google search this from immotools) or kess v2, mpps, etc

Any successful experience?

Definitely yes. i have some experience with s3000 which is on petrol models after 2003 inc 2.0t sport on megane version and read manually by mpps .

i resolder obd and give 14v supply to the ecu and the mpps v12 (chinees clone) but always use supply over +13v cause the interface burning the can chip

For command name SC003, look here the picture from Dialogys e.g. DCM12 saving data before replacing the ecu :

Another photo for V42 petrol injection 

There are some ecus SC003 possible >> diesel DCM12, DCM34 , petrol V42 <<
also some SC003 not implemented >> petrol EMS 3132, SIM32 

So finding that command depends on the ecu, diesel have, petrol might not have.

(BIG thanks to those share info in mhhauto.com)

Original:How to download and save ecu data in Renault CAN CLIP

KESS V2 FW V4.036 add tokens - SUCCESS (personal experience)

I bought a KESS V2 Master Truck version with K-Suite 2.22 Firmware 4.036 online three months ago. When the tokens used up, I followed the guide video to add token and it was working. Here I will give a clear explanation of KESS token reset.

Before adding token you need download two zip files:

1. KSuite-tokens.zip
2. zip

After that you can start toad tokens for KESS V2 truck, I summarized following steps for your reference:

Step1. First you should check if the KESS V2 K-suite software is well installed.

Open My Computer>>Device Manager>>Universal Serial Bus Controller>> USB Device

Step2. Remember disconnect both local area network and wireless network otherwise you will damage the device.

Step3. Unzip Tool.zip file you will get 3 files: “K10033818” ECU-Tuners, “Tokens” folder and “Token1.tok”, copy these 3 files to the desktop, then delete “Tool folder” and the zip file both on the desktop.

Step4. Cut KSuite-tokens.zip to local disk [C] and unzip it.

Step5. Open “K10033818” ECU-Tuners browse My Computer>> Local disk [C]>> KSuite-tokens>> KSuite. Click “OK” >> “Reset Token Count” >> “OK”.

Step6. Wait for a minute, it will show KSuite is updating, after that close the KSuite interface.

Step7. Delete the “KSuite-tokens” folder in local disk [C], unzip KSuite-tokens.zip and get “KSuite-tokens” folder again.

Step8. Rename “Token1.tok” on desktop to “Token2.tok”, copy “Token2.tok” to “Tokens” folder on desktop.

Step9. This step is to repeat Step5 and Step6, after that you can add tokens for KESS V2 successfully.

Also here I want to thank engineers of www.obd2france.com they gave me much useful help to add token for my KESS V2.

This is from OBD2 Francais website technical support:KESS V2 FW V4.036 add tokens - SUCCESS (personal experience)

This is the guide video for KESS V2 token reset: