How to run ISTA-P with K+DCAN cable using ICOM A2

This is the instruction on how to run Rheingold ista/p with K+DCAN USB cable using BMW ICOM A2 diagnostic tool.

 

1.Disable firewall.

2.Remove voltage constant.

3.Extract and copy the ICOM emulator xml files to:

*:\apps\wsm\apps\agent\data\

4. In VMware network editor, ensure "VMnet0" is set to "bridged" and your LAN network adaptor is selected in the drop down menu.

5. In VMware network editor, add a new network called "VMnet3" and set it up as shown in the picture below:
Note: Click "apply" and "ok" and close down VMware.

6. Open VMware again and start emulator using the k+dcan snapshot. Once it has loaded up, go to the vm settings and change network adaptor 1 to "VMnet3(host only)". Click "ok" then wait 30 seconds for network to re-initialise.
note: you can now create new snapshot if you want.

7. Connect K+DCAN cable to emulator and car and run "ifhsrv32" using icon on emulator desktop.

note: ensure k+dcan cable usb icon is active in the vm.

8. Start ISTAP native, start a session and choose "ICOM emulator" in connection manager screen.
note: if everything is ok, the led on your cable should start to flash after a minute or so. If not, recheck emulator settings (i.e. com9, latency timer set to 1 etc.).

Ceci est du support technique du site Web www.obd2france.com:Comment faire pour exécuter ISTA P avec câble K + DCAN utilisant ICOM A2